Plastic Valves

Ball Valve
Iso. Tactic PP
Solid PVDF
Alloy - PP
Alloy HDPE
Pneumatic / Electric Actuator
  • Valves are of three piece design, fitted with six set of metallic studs and nuts which contributes to their sturdy construction.
  • Valves have full bore; thereby, allowing full 100% flow.
  • Body and Stem seals are offered in various elastomers like EPDM, Neoprene, Hyplon, Butyl, Viton and also in PTFE for chemical resistance against most chemicals.
  • Valves with PTFE seals are provided with steel ring inserts which gives better sealing and safety features.
  • Steel inserts in stem and handle give more strength, sturdiness, longer life and better performance.
  • Carbon black resists ultraviolet rays and prevents degradation of polypropylene in sunlight exposure.
  • Available in screwed end connections also.
    • Size Range :15 mm NB to 150 mm NB.
    • Drilling :As per all internationally accepted standards, such as BS, DIN, ASA 150 etc.
    • Hydrostatic Test :At 10 kg/ for Body and Seat.
No. Part Qty. Material
1 Body 1 Iso. PP/PPH/PVDF/A. PP/A. HD
2 End piece 2 Iso. PP/PPH/PVDF/A. PP/A. HD
3 Ball 1 Iso. PP/PPH/PVDF/A. PP/A. HD
4 Stem 1 MS/SS304/SS316 insert moulded with Iso. PP/PPH/PVDF/A. PP/A. HD
5 Seat 2 PTFE
6 Body Seal 0 rings 2 EPDM/NEOPRENE /PTFE / VITON
7 Stem Seal 0 rings 2 EPDM/NEOPRENE /PTFE / VITON
8 Bearing 1 PTFE
9 Bearing 1 Iso. PP
10 Distance Piece 1 Iso. PP
11 Stud, Nut & Washer - MS / SS304/ SS316
12 Stem Nut 1 MS / SS304/ SS316
13 Nut Cap - Iso. PP
14 Handle 1 MS insert moulded with PP
15 Handle Cap 1 Iso. PP