Dinesh Plastic Products

Dimensional Details

Size (NB) H L
25 mm 192.0 64.0
32 mm 192.0 64.0
40 mm 204.0 135.0
50 mm 213.0 135.0
65 mm 305.0 167.0
80 mm 305.0 167.0
100 mm 425.0 173.0
150 mm 628.0 295.0

All dimension are in mm (2)

Ball Check Valve Technical Drawing

Bill of Material

No. Part Qty. Material
1 Body 1 Iso. PP / PPH / PVDF / A. PP / A. HD
2 Ball 1 Iso. PP / PPH / PVDF / A. PP / A. HD
3 Ball Guid Ring 1 Iso. PP / PPH / PVDF / A. PP / A. HD
4 Ball Seat 1 EPDM / NEOPRENE / VITON
5 Nut 1 Iso. PP / PPH / PVDF / A. PP / A. HD
6 Strainer 1 Iso. PP / PPH / PVDF / A. PP / A. HD

Features of DPP 3-Piece Ball Check Valve

  • Free floating ball allows maximum flow through valve.
  • The only moving part is the ball, so maintenance is reduced/nil.
  • The solid polypropylene/ PVDF ball seated on elastomer seatgives no chance for leakage.
  • Ball fully supported by guide ribs for full flow & minimum turbulence.
  • Available with various elastomer seats like Neoprene, Hyplon, EPDM, Viton for compatibility with different chemicals.
  • Tight shut-off achieved at a minimum of 1 Meter Water Column.
  • Available in screwed end onnections also.
    Size Range:
    15 mm NB to 100 mm NB.
    Drilling:
    As per all internationally accepted standards, such as BS, DIN, ASA 150, etc.
    Hydrostatic Test:
    At 10 kg/sq,cm,g for Body and Seat.
Dinesh Plastic Products
P.O. Box: 69 , ' NIF ' Compound, Chhapra Road, Navsari - 396445, India.
Ph. : +91-2637-258668, 250667 | Fax: +91-2637-259182
Email: dineshplastic@dppvalves.com

Copyright 2011 Dinesh Plastic Products. All Rights Reserved | Designed by Brand Aid