Dinesh Plastic Products

Dimensional Details

Size (NB) L T
15 mm 130 12.50
20 mm 150 14.00
25 mm 160 16.00
32 mm 200 17.00
40 mm 200 17.00
50 mm 230 19.00
65 mm 310 23.00
80 mm 310 23.00
100 mm 350 23.00
150 mm 480 29.00

All dimension are in mm (2)

> Face to Face Length Confirms to DIN 3202 Standard

Ball Check Valve Technical Drawing

Bill of Material

No. Part Qty. Material
1 Body 1 Iso. PP / PPH / PVDF / A. PP / A. HD
2 End piece 2 Iso. PP / PPH / PVDF / A. PP / A. HD
3 Ball 1 Iso. PP / PPH / PVDF / A. PP / A. HD
4 Ball Guide Ring 1 Iso. PP / PPH / PVDF / A. PP / A. HD
5 Body Seal O ring 2 EPDM / NEOPRENE / PTFE / VITON
6 Ball Seal O ring 1 EPDM / NEOPRENE / VITON
7 Stud, Nut & Washer - MS / SS304 / SS316
8 Nut Cap - Iso. PP

Features of DPP 3-Piece Ball Check Valve

  • Free floating ball allows maximum flow through valve.
  • The only moving part is the ball, so maintenance is reduced/nil.
  • The solid polypropylene/ PVDF ball seated on elastomer seatgives no chance for leakage.
  • Ball fully supported by guide ribs for full flow and minimum turbulence.
  • Available with various elastomer seats like Neoprene, Hyplon, EPDM, Viton for compatibility with different chemicals.
  • Tight shut-off achieved at a minimum of 1 Meter Water.
  • Available in screwed end onnections also.
    Size Range:
    15 mm NB to 150 mm NB.
    Drilling:
    As per all internationally accepted standards, such as BS, DIN, ASA 150 etc.
    Hydrostatic Test:
    At 10 kg/sq.cm.g for Body and Seat.
Dinesh Plastic Products
P.O. Box: 69 , ' NIF ' Compound, Chhapra Road, Navsari - 396445, India.
Ph. : +91-2637-258668, 250667 | Fax: +91-2637-259182
Email: dineshplastic@dppvalves.com

Copyright 2011 Dinesh Plastic Products. All Rights Reserved | Designed by Brand Aid